Every kitchen has one cabinet that swallowed something years ago. We replace tired lazy Susans and fit real corner solutions — so the worst cabinet in the room becomes one you use on purpose.
It's the biggest single volume of storage you own, and it's the one you've quietly given up on. That's not your fault — most corner cabinets were built without any thought about how a person would reach into them.
Something went in there years ago and has not been seen since.
The old lazy Susan wobbles, catches on the door, or has a shelf that's cracked through.
It's a blind corner — a plain door with a cavern behind it and no way to see in.
Getting anything out means half your body inside the cabinet.
It's become long-term storage for appliances you use twice a year.
Almost nobody knows the name of their corner cabinet, and it decides everything. Open the door and compare.
Century Components units, bench-crafted in Sugarcreek, Ohio, sized to your cabinet rather than to a catalog. Which one you get depends entirely on the corner you have.
Full round shelves with a wedge cut out for the doors, which mount to the shelf and swing round with it. The classic answer to an angled corner, and still the best one.
Kidney-shaped shelves that clear a door hinged on the frame rather than the shelf. The right call where a pie-cut would foul the opening.
A two-stage mechanism: the front tray slides out, the back tray follows it round into the opening. Turns dead space into reachable space without rebuilding the cabinet.
The premium answer. Drawers cut on the diagonal that pull straight out of the corner — no reaching, no rotating, nothing hidden. Needs the right cabinet run.
Same corner, new mechanism. If the old one wobbles, sticks or has a shelf cracked through, replacing the unit is often the cheapest thing on this page.
Where a rotating mechanism won't fit, pilaster-mounted shelves you can move — less clever, but reachable and far better than a fixed shelf in the dark.
Corners are the one organizer job we won't quote over the phone. Too much depends on how the cabinet was built, and a mechanism that binds on the door frame is worse than no mechanism.
Open the door and take one picture. That alone usually tells us which of the corner types you have and roughly what's possible.
Opening width, how the door is hinged, how far it swings, and what's behind the wall of the cabinet. Corners hide surprises more than any other cabinet.
Typically a good option and a better one — a susan that solves it, or drawers that solve it properly for more money. You get both prices and pick.
Made to the measurements we took, then checked here before it goes anywhere near your kitchen.
The old unit comes out, the new one goes in level, and the doors are reset so nothing catches as it turns. Usually a single day.
Rotated full circle with weight on it, because an empty susan and a loaded one don't behave the same way.
A straight base cabinet is a box, and a box is predictable. A corner is a compromise somebody made when the kitchen was installed, and no two were compromised the same way. The mechanism has to clear the door, the frame and whatever the last person did in there.
Yes, and it's one of the more satisfying jobs we do. A susan that wobbles, sticks or has a shelf cracked through can usually be swapped for a new unit in the same corner, with no change to the cabinet or the doors.
We match the type — pie-cut or kidney — to how your doors are hinged, because fitting the wrong one is how you end up with a shelf that catches every time it comes round.
More than most people think. A blind corner pull-out works in two stages — the front tray slides out through the opening, and the rear tray follows it round, bringing the hidden section out where you can see it.
It needs enough door opening to let the trays through, which is the main thing we check. Where there isn't room, an adjustable shelf system is the honest fallback: less clever, but you can still see what's in there.
Generally, yes. Drawers pull straight out, hold their contents flat and visible, and don't have a rotating mechanism to go out of true. Nothing hides at the back because there is no back.
The catch is that not every corner can take them — they need the right cabinet run and clearance to swing out. When a corner can take drawers we'll always say so, and we'll quote both so you can weigh it.
Almost never for a susan or a pull-out — those go into the cabinet you have, using the doors you have. Corner drawers are the exception, since the front of the cabinet changes.
If you're already having new doors made, that's the moment to look seriously at corner drawers, because the door work is happening anyway.
Because "corner cabinet" describes four or five quite different things, and the right mechanism depends on which one you've got. One photo of the open door tells us more than ten minutes on the phone.
It also saves you a visit if the answer turns out to be simple — sometimes we can tell you straight away that a replacement susan is all you need.
Open the door, take one picture, and we'll tell you what's possible in it.
Request a Free Quote →Storage solutions for kitchens without a square foot to spare.
What to do with the gap between your uppers and the ceiling.
Simple upgrades that take decades off a dated kitchen.
Send a photo of the open door and we'll tell you what can be done in it — free, and before anyone visits.